Peavey IPR2 7500 DSP Power Amplifier

Peavey IPR2 7500 DSP Power Amplifier
Peavey IPR2 7500 DSP Power Amplifier

Product Code: PE-248-7991
Availability: In Stock
Retail Price :$1,299.99Your Cost : $999.99
Qty:     - OR -   Add to Wish List
Add to Compare
Description Reviews (0)
Peavey IPR2 7500 DSP Power Amplifier

Peavey's IPR2 7500 DSP power amp boasts over 3,700 watts per channel at 2 ohms and weighs less than 15 lbs. It also features two channel-independent Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, patented DDT speaker protection, and the revolutionary IPR Class D topology.

IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed Class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design.

Advanced technology and extensive protection circuitry facilitate operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry enables trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks for cooling.

Specifications: • Power output (@ 1 kHz at <0.1% THD. both channels driven): 3,750 watts x 2 (2 ohms), 2022 watts x 2 (4 ohms), 1250 watts x 2 (8 ohms) • Power output: (@ 1 kHz at <0.1 % THD> single channel driven) 3,850 watts x 1 (2 ohms), 2400 watts x 1 (4 ohms), 1330 watts x 1 (8 ohms) • Minimum load impedance: 2 ohms • Frequency response: 20 Hz - 35 kHz (-0.0 dB, -3.0 dB at 1 watt) • Voltage gain: x 40 (+32 dB) • Crossover: 100 Hz switchable 2nd order high pass and 3rd order low pass per channel • Crosstalk: > -85 dB @ 1 kHz at 1000 watts power @ 8 ohms • Hum and noise > -106 dB, "A" weighted referenced to rated power @ 4 ohms • Damping factor (8 ohms): > 200:1 @ 20 Hz - 1 kHz • Phase response: +15 to -85 degrees from 20 Hz to 20 kHz • Input sensitivity: 2.25 volts +/- 3% for 1 kHz 4 ohm rated power, 2.195 volts +/- 3% for 1 kHz 2 ohm rated power • Input impedance: 20k ohms balanced, 10k ohms unbalanced • Cooling: Temperature dependent variable speed 80 mm DC fans • Net weight: 14.6 lbs. (6.61 kg) • Dimensions: 3.5" x 19" x 17" behind front panel (+ 0.6" for handle).

The groundbreaking IPR2 7500 DSP utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. The DSP models in this series feature independent, assignable crossover points, delay, EQ presets, security lock settings and an intuitive setup wizard.
  • Cool-running, high headroom, lightweight amp for subs or full-range speakers
  • Independent, assignable crossover points, delay, and EQ presets
  • DDT protection helps prevent distortion, speaker overload, and damage
  • Revolutionary IPR Class D topology for reduced weight and unrivaled efficiency
  • XLR and 1/4" inputs; combo twist-lock speaker output connectors
  • Detented input controls

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Copyright 2016 Endean Music LLC.®. Fender®, Gibson®, Les Paul®, Tonepros® and other brand names are trademarks of their respective owners.
Powered By
Endean Music LLC. © 2017