Peavey IPR2 5000 DSP Power Amplifier

Peavey IPR2 5000 DSP Power Amplifier
Peavey IPR2 5000 DSP Power Amplifier

Product Code: PE-248-7989
Availability: In Stock
Retail Price :$1,199.99Your Cost : $899.99
Qty:     - OR -   Add to Wish List
Add to Compare
Description Reviews (0)
Peavey IPR2 5000 DSP Power Amplifier

The IPR2 5000 DSP boasts over 2,500 watts per channel at 2 ohms and weighs less than 7 lbs. It also features 2-channel independent Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, patented DDT speaker protection, and the revolutionary IPR class D topology.

IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design.

Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Specifications: • Power output (@ 1 kHz at <0.1% THD. both channels driven): 2,525 watts x 2 (2 ohms), 1,510 watts x 2 (4 ohms), 890 watts x 2 (8 ohms) • Power output: (@ 1 kHz at <0.1 % THD> single channel driven) 2,900 watts x 1 (2 ohms), 1,780 watts x 1 (4 ohms), 975 watts x 1 (8 ohms) • Minimum load impedance: 2 ohms • Frequency response: 20 Hz - 40 kHz (-0.0 dB, -3.0 dB at 1 watt) • Voltage gain: x 40 (+32 dB) • Crossover: 100 Hz switchable 2nd order high pass and 3rd order low pass per channel • Crosstalk: > -70 dB @ 1 kHz at 700 watts power @ 8 ohms • Hum and noise > -106 dB, "A" weighted referenced to rated power @ 4 ohms • Damping factor (8 ohms): > 200:1 @ 20 Hz - 1 kHz • Phase response: +5 to -85 degrees from 20 Hz to 20 kHz • Input sensitivity: 2.25 volts +/-3% for 1 kHz 4 ohm rated power, 2.195 volts +/- 3% for 1 kHz 2 ohm rated power • Input impedance: 20k ohms balanced, 10k ohms unbalanced • Cooling: Three temperature dependent variable speed fans • Net weight: 14.6 lbs. (6.61 kg) • Dimensions: 3.5" x 19" x 17" behind front panel (+ 0.6" for handle).

The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. The DSP models in this series feature independent, assignable crossover points, delay, EQ presets, security lock settings and an intuitive setup wizard.
  • Independent, assignable crossover points, delay, and EQ presets
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR and 1/4" inputs
  • Twist-lock output connectors
  • Light weight

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Copyright 2016 Endean Music LLC.®. Fender®, Gibson®, Les Paul®, Tonepros® and other brand names are trademarks of their respective owners.
Powered By
Endean Music LLC. © 2017