Peavey PV 3800 Power Amplifier

Peavey PV 3800 Power Amplifier
Peavey PV 3800 Power Amplifier

Product Code: PE-248-8348
Availability: In Stock
Retail Price :$1,299.99Your Cost : $829.99
Qty:     - OR -   Add to Wish List
Add to Compare
Description Reviews (0)
Peavey PV 3800 Power Amplifier

Add a 2,650 watt PV 3800 amp to your Bi-Pack system for a tri-amped system! Our highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with our famous DDT™ speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.

Specifications: • Rated power (1 x 4 ohms): 1,500 watts @ 1 kHz at <0.05% T.H.D. • Rated power (1 x 8 ohms): 875 watts @ 1 kHz at <0.05% T.H.D. • Minimum load impedance: 4 ohms • Maximum RMS voltage: 93 volts • Frequency response (+0, -2 dB at 1 watt): 10 Hz - 100 kHz • Power bandwidth (+0, -3 dB at rated 4 ohm power): 10 Hz - 35 kHz • T.H.D. (2 x 4 ohms): <0.1% @ 1,050 watts per channel from 20 Hz to 20 kHz • T.H.D. (2 x 8 ohms): <0.1% @ 700 watts per channel from 20 Hz to 20 kHz • Input Sensitivity (x40): 1.88 volts +/- 3% for 1 kHz, 4 ohm rated power • Input Impedance: 15 k ohms, balanced • Current draw @ 1/8 power: 1,185 watts @ 4 ohms; 720 watts @ 8 ohms • Current draw @ 1/3 power: 2,975 watts @ 4 ohms; 1,835 watts @ 8 ohms • Connectors: Per channel, Combi XLR & 6.3 mm phone input, Speakon® and Binding speaker output, 15 amp IEC mains connector • Dimensions: 3.5" x 19" x 14.81" (88.9 x 482.6 x 376.3 mm + 31.8 for rear support ears and connectors).

 

Overview
Add a 2,650 watt PV 3800 amp to your Bi-Pack system for a tri-amped system! Our highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them.
Highlights
  • 2-rack-space, 2-channel power amp with DDT protection
  • Turn On/Turn Off protection and FLS (Fault Load Correction)
  • 1,300 watts per channel at 4 ohms
  • 775 watts per channel at 8 ohms
  • 2,650 watts bridged at 8 ohms
  • Twin temperature-dependent variable-speed fans
  • Weight: 44.50 lbs. (20.19 kg)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright 2016 Endean Music LLC.®. Fender®, Gibson®, Les Paul®, Tonepros® and other brand names are trademarks of their respective owners.
Powered By 123reg.direct
Endean Music LLC. © 2017