Peavey CS 2000 Power Amplifier

Peavey CS 2000 Power Amplifier

Product Code: PE-248-791
Availability: In Stock
Retail Price :$999.99Your Cost : $799.99
Qty:     - OR -   Add to Wish List
Add to Compare
Description Reviews (0)
Peavey CS 2000 Power Amplifier

Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the 1970s, the CS® Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including their exclusive DDT™ compression/anti-clipping protection. With its 2RU design and power points up to 4080 watts, this latest evolution of the CS® Series is leaner, louder, and lighter than ever.

Specifications: • CS 2000 output power (1 kHz, 0.1% THD) per channel stereo: 490 watts RMS @ 8 ohms, 760 watts RMS @ 4 ohms, 1075 watts @ 2 ohms • Output power (1 kHz, 0.1% THD) bridged mono: 1,520 watts RMS @ 8 ohms, 2,150 watts RMS @ 4 ohms • Dimensions: 3.5" H x 19" W x 17.5" D.

With a long history of reliability and now with more power than ever before, these workhorses are giving the pro audio world even more reasons to choose the CS® Series.

Since 1975 the Peavey CS Series professional power amps have been delivering the solid performance and unsurpassed reliability for which Peavey is famous. Advanced technologies and extensive protection circuitry allow continuous operation, even under difficult loads and power conditions. These new, even more powerful models use 14 power transistors per channel, almost twice the number found in more expensive competitors. All amps in the series feature multi-rail class G/H topology and massive toroidal transformers, and fit in 2 rack spaces. A new RampUp™ circuit protects speakers from potentially damaging turn-on bursts of power.


Building on the reputation of the world-famous Peavey CS® 800, which conquered the power amp market in the 1970s, the CS® Series is the global standard bearer for workhorse reliability.
  • Massive toroidal transformer and storage capacitors
  • Twin temperature-dependent variable speed fans
  • Patented DDT™ soft limiter protects amp and speakers
  • Cast front panel and handles, steel chassis
  • Rear rack supports
  • Mil spec fiberglass circuit boards
  • RampUp™ Signal Control

Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Specifications: • Power output (@ 1 kHz at <0.1% THD. both channels driven): 2,525 watts x 2 (2 ohms), 1,510 watts x 2 (4 ohms), 890 watts x 2 (8 ohms) • Power output: (@ 1 kHz at <0.1 % THD> single channel driven) 2,900 watts x 1 (2 ohms), 1,780 watts x 1 (4 ohms), 975 watts x 1 (8 ohms) • Minimum load impedance: 2 ohms • Frequency response: 20 Hz - 40 kHz (-0.0 dB, -3.0 dB at 1 watt) • Voltage gain: x 40 (+32 dB) • Crossover: 100 Hz switchable 2nd order high pass and 3rd order low pass per channel • Crosstalk: > -70 dB @ 1 kHz at 700 watts power @ 8 ohms • Hum and noise > -106 dB, "A" weighted referenced to rated power @ 4 ohms • Damping factor (8 ohms): > 200:1 @ 20 Hz - 1 kHz • Phase response: +5 to -85 degrees from 20 Hz to 20 kHz • Input sensitivity: 2.25 volts +/-3% for 1 kHz 4 ohm rated power, 2.195 volts +/- 3% for 1 kHz 2 ohm rated power • Input impedance: 20k ohms balanced, 10k ohms unbalanced • Cooling: Three temperature dependent variable speed fans • Net weight: 14.6 lbs. (6.61 kg) • Dimensions: 3.5" x 19" x 17" behind front panel (+ 0.6" for handle).


The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency.
  • 2-channel independent Linkwitz-Riley crossovers
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR and 1/4" inputs
  • Twist-lock output connectors
  • Light weight

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Copyright 2016 Endean Music LLC.®. Fender®, Gibson®, Les Paul®, Tonepros® and other brand names are trademarks of their respective owners.
Powered By
Endean Music LLC. © 2017